Ono Sokki TS-3200 Digital Torque Meter

The Ono Sokki TS-3200A is greatly improved in setting and usability with large sized LCD which offers easy and clear view of good contrast. Setting conditions and measurement data can be displayed in the same screen.

Ten torque detection settings can be stored in memory, which is very convenient function when you use several torque detectors. The detector setting can be changed easily at the time for replacement.

Items on a main display can be selected and displayed simultaneously up to 7 items. As well as torque, rotation and output (W) of calculated data, each of maximum value, minimum value, peak to peak value, and ripple ratio can be selected to display. For example, average value and fluctuation range of torque can be monitored at the same time. In addition, the TS-3200A provides a variety of interfaces such as data outputs of 2 channels with analog voltage as standard, digital interfaces and additional functions as options. It may expand possibility of data communication with external equipment for control and data processing.

In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €


  • Large sized LCD display panel enables displaying up to 7 settings of multi data.
  • Greatly improved in setting and usability
  • Compact and light weighted, 2/3 by volume, 1/2 by mass (compared to previous model the TS-3100B)
  • Provided a variety of interface for control and data communication ( Selectable from RS-232C, GP-IB or LAN interfaces as optional functions )
  • Ten torque detection settings can be stored in memory. The setting for each detector can be changed easily at the time for replacement.
  • Temperature compensation function---Compensation of temperature data enables higher-accuracy measurement.
  • Displays of maximum value, minimum value, peak to peak, and absolute value are available.

Further Information

Overview specifications

Amplification section

Isolated unbalanced DC amplification

Input signal

Phase-differential type torque detector output signal

Input impedance

Approx. 2 kΩ (when input signal amplitude at 2 Vpp or less)

Input frequency range

200 Hz to 50 kHz

Input signal amplitude range

0.2 Vpp to 15 Vpp


TRC116 - 23A10 - 7F


1 to 9999


1 to 65535


mNm, Nm, kNm

Number of detection gears

1 to 9999 P/R

N-0 compensation

Stored in each memory for CW and CCW directions


Time constant can be settable among; 16 ms/31 ms/63 ms/125 ms/250 ms/500 ms/1 s/2 s/4 s/8 s/16 s/32 s/64 s

Number of display digits

Polarity + 4-digit or polarity + 5-digit, selectable

Measurement clock

4.195 MHz

Sample clock

Sampling time for 1 data: 1/256 Hz (approx. 4 ms)

Number of display digits

Polarity + 4-digit or 5-digit, selectable


mNm, Nm, kNm

Display gate time setting

1 s to 10 s (shared with a rotating section)or external gate


When combined with the detector (with 1 s gate time)

  • N-0 compensation used: ±0.2 %/F.S. ±1 count (4-digit)

  • N-0 compensation not used: ±0.5 %/F.S. ±1 count (4-digit)

Analog output

Voltage output 0 to ±10 V/F.S.
(Attenuation setting of the F.S. is possible from 0.1 V to 10 V in 0.1 V steps.)


16 ms to 64 s depending on the time constant setting


When used in combination with a torque detector (The display renewal rate is 1 s.)

  • N-0 compensation used:±0.2 %/F.S. ±10 mV (4-digit)

  • N-0 compensation not used: ±0.5 %/F.S. ±10 mV (4-digit)

Temperature drift

±0.01 %/F.S./ °C

Write a review