Ono Sokki Signal cables, Tips & Accessories for Gauge Sensors

Signal Cables and accessories for the Ono Sokki range of Linear Gauge Sensors

Further Information

In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €

Signal cable


Model name  Length  Sensor side  Outer dimensions  Counter side
Signal extension cable AA-8801
5 m BS/GS series
Linear gauge sensor

Illustration (A-800 series signal cable)

*cable extension from a sensor: 30 m max.
  Cable D5-UL:UL standard compliant

DG series
Gauge counter
AA-8802
 
10 m
AA-8803 20 m
AA-8804 30 m
Signal extension cable AA-8901 5 m GS-3813
GS-3830
AA8901/8902/8903/8904 DG-5100
AA-8902 10 m
AA-8903 20 m
AA-8904 30 m
Signal extension cable AA-8910 0.2 m BS/GS series Linear gauge sensor (excluding GS-3800 series) AA-8910 DG-5100
BCD cable AA-8101
3 m DG-4120/4140/
4240/4280 Gauge counter

Illustration (AA-8101 Signal cable)

DA-4130
DA converter
AA-8107
3 m DG-4120/4140/
4240/4280 Gauge counter

Illustration (AA-8107 signal cable)

-

Power supply cable AX-2050N
3 m DG-4120/4140/
4240/4280 Gauge counter

Illustration (AA-2050 Signal cable)

*for 100 VAC

-

RS-232C cable AX-5022 2 m DG-2310
Gauge counter
PC
Signal cable MX-7105

5 m DG-0010
Output signal conversion box


Cable D5-UL:UL standard compliant

Open collector output
 
MX-7110 10 m
MX-7115 15 m
MX-7120 20 m
Signal cable Made to order 30 m to
1200 m
DG-0020
Output signal conversion box
Line driver output

*DX30A-36P is a crimping type connector. A tool for crimping type is required for wiring.
*Soldered type connector (DX40-36P, DX36CV1) is recommenced when you buy a connector.


Mechanical release

Outer Dimension


 
 
 

Applicable gauge sensor Model name



GS-201,GS-102
BS-102/102W/112/112W br>
HS-3412/3425
DG-525H/825/925*
AA-813 Illustration(AA-812 Mechanical release)

*Use with the AA-972 release lifter.


Air release

Outer Dimension

Applicable gauge sensor Model name


GS-201, GS-102, BS-102/112
DG-525H/825/925*
AA-816 Illustration (AA-815 Air release)

*Use with the AA-972 release lifter.


Finger lift

Outer Dimension

Applicable gauge sensor Model name
For all models (except for BS series and water-proof type) AA-969 Illustration (AA-969 Finger lift)


Lift lever / Release lifter

Outer Dimension

Applicable gauge sensor  Model name  
DG-525H/825/925 AA-971 Illustration (AA-971 Lift lever)
DG-525H/825/925
(Release is sold separately.)
AA-972 Illustration (AA-972 Release lifter)


Air lifter

Applicable gauge sensor  Model name  
GS-1713/1813/
6713/6813/
4713/4813/
3813
 AA-6102
 
*2 *3
GS-1730/1830/
6730/6830/
4730/4830
/3830
 AA-6103
 *2 *3

*1 Air lifter (AA-6100/6101) : not applicable to the protection class IP64,IP64G
*2 The AA-3102/3103 air lifter is required for an extension spindle. Full length becomes l22mm/37mm longer.
*3 It is required for air piping and electromagnetic valve for ON/OFF operation. The distance between sensor mounting surface and spindle sensor (9mm) is not changed.


Extension spindle(depth measurement for pin hole)

Outer Dimension

Extension length  Model name  
30 mm AA-844 Illustration (AA-844 Extension spindle)
Material:SUS303 Diameter:φ 3.8 mm Thread part:M2.5
50 mm AA-845 Illustration (AA-845 Extension spindle)
Material:SUS303 Diameter:φ 3.8 mm Thread part:M2.5


Measurement tip

Outer Dimension

 AA-0200  AA-0210   AA-0220 *1   AA-0230   AA-0240
Illustration (AA-0200 Measurement tip)
Material at a tip:steel ball
Illustration (AA-0210 Measurement tip)

Material:SKS3
Illustration (AA-0220 Measurement tip)

Material:SKS3
Illustration (AA-0230 Measurement tip)

Material:SKS3
Illustration (AA-0240 Measurement tip)


Material:SKS3
 AA-0250   AA-827 *2   AA-828 *2 
Illustration (AA-0250 Measurement tip)

Material:SKS3
Illustration (AA-827 Measurement tip)

Material:SUj2
Illustration (AA-828 Measurement tip)

Material:SUj2
 AA-0320   AA-921   AA-0330
Made to order
 AA-0400 
Illustration (AA-0320 Measurement tip)



Material:SKS3
Illustration (AA-921 Measurement tip)



Material:SKS3
Illustration (AA-0330 Measurement tip)
Material of the ball at a tip:carbide
Illustration (AA-0400 Measurement tip)


Material of the ball at a tip:ruby
*1 When mounting a flat measurement tip such as AA-0220/0240/0250 to a gauge sensor with a measurement resolution of 1/1000mm (1 µ m ), adjustment of the degree of parallelization to match that of the surface of the measurement stand is required. In this case, the measurement tip and gauge stand must be purchased as a pair.
*Accuracy after parallelization adjustment by us: approx. 10 µm
*2 When mounting a roller measurement tip such as AA-827/828 etc to a gauge sensor with a measurement resolution of 1/1000mm (1 µm), the accuracy described its specification is not obtained.
The AA-827/828 uses a bearing, but as the gap cannot be eliminated, an error of approximately 10µm may appear.

 

Joint measurement tip adapter (for replacement of mesurement tip)

 Applicable gauge sensor  Model name

GS-102/251/503/1000 AA-829
Made to order
Illustration (AA-829 Joint measurement tip adapter)Material:C36002


Dust proof rubber

Outer Dimension


Applicable gauge sensor  Model name  L1
(mm)
External diameter of collar
(φ mm)
External diameter of rubber
(φ mm)
Stem diameter 
(φ mm)
Material *3
GS-1000 AA-841 *1 40.5 22 24 15 CR
GS-102/251
DG-825/925
AA-843 *1 10.5 16 15 8 NBR
GS-5011 AA-975 *2 8.5 - 16 20 NBR
GS-1513A/1613A/
6513/6613
AA-4100 - - 8 8 Si
GS-4513/4613/
4530/4630 *4
Made to order
*5
- - 10 10 Si
GS-1713/1813/
6713/6613
AA-4102 - - 8 15 Si
GS-1730/1830/
6730/6830
AA-4103 - - 8 15 Si
GS-4713/4813/
3813
AA-4104 - - 8 15 HNBR
GS-4730/4830/
3830
AA-4105 - - 8 15 HNBR
*1 Provided the measurement tip for dust proof rubber as standard. (Refer to the following drawing for outer dimensions.)
*2 Provided the joint for dust proof rubber as standard. (Refer to the above and following drawings for outer dimensions.)
*3 CR:Chloroprene rubber, NBR:nitrile rubber, EPM:Ethylene-propylene rubber, Si:silicon rubber, HNBR:hydrogenated nitrile rubber
*4 Dust-proof rubber for the GS-4500/4600 series (material:fluorine rubber) is made to order. (For the replacement, please return us a product.)
*5 The installation is required by Ono Sokki. (Delivery cost may be charged separately.)


■AA-841/843/
 854/973
With the measurement tip for dust-proof rubber
for BS series, GS-102/251/503/1000
Illustration (AA series Dust-proof rubber)
■AA-829 Measurement tip adapter
for GS-102/251/503/1000
The AA-829 measurement tip adapter is required when the special measurement tip and dust-proof rubber are used with.
■AA-975 With the joint for dust-proof rubber for GS-5011
Please attach the AA-975 (joint for dust-proof rubber) directly when the special measurement tip is used with. The joint for the special measurement tip is no required.






















Mounting fixture

 Applicable gauge sensor  Model name  
GS-5050/5051/5100/5101 AA-8560 Illustration (AA-8560 Mounting fixture)
GS-1513A/1530A/1613A/1630A
GS-4513/4530/4613/4630
GS-6513/6613/6530/6630
GS-1713/1730/1813/1830
GS-3813/3830/4713/4730
GS-4813/4830/6713/6730
GS-6813/6830
AA-3310 Illustration (AA-3310 Mounting fixture)


Gauge stand

Model name of gauge stand ST-022 ST-0230 ST-044B
Applicable gauge gauge sensor
BS-1210 *1
BS-1310 *1
GS-7710A *1
GS-7710NA *1
GS-1713A/1730A
GS-1813A/1830A
GS-3813B/3830B
GS-4713A/4730A
GS-4813A/4830A
GS-6713A/6730A
GS-6813A/6830A
GS-5050A/5100A
GS-5051A/5101A
reference Stem D. Φ8 mm
Stroke 10 mm
Stem D. Φ15 mm
Stroke 13/30 mm
Stem D. Φ15 mm
Stroke 50/100 mm
Table dimension (mm) 80 × 85 105 × 105
Diameter of mounting hole Φ8 to 10 Φ15 Φ15 to 20
Table material Ceramic (with groove)
Flatness of measuring surface 1 µm
Roughness of measuring surface 0.4 S Lapping finish
Base stand (Width×Depth mm) 100 ×160 130 × 200
Measurable depth (mm) approx. 59 approx. 60 approx. 73.5
Measurable height (mm) approx. 115 approx. 210
Weight 4.1 kg 4.2 kg 7.5 kg
*1 Stand bush AA-891 is required for the ST-0230 and ST-044B depending on the combination with the gauge sensor of Φ8 Stem diameter.


Knob (A): for attachment and removal from the gauge sensor

Knob (B) and (C): vertical adjustment of stand (shaft)

Illustration (ST series Gauge stand)

 

Accuracy of gauge stand

The outer dimensions of the SH-022 and ST-022 are same, but the accuracy of its squareness and parallelism is different.

 


When attaching a flat measurement tip such as the AA-0220/0240/0250/921 to a gauge with a measurement resolution of 0.05µm/1µm, adjustment of the degree of parallelization to match that of the surface of the measurement stand is required. In this case, the measurement tip and stand must be purchased as a pair (additional cost required). The accuracy of the parallelization is 10µm or less. Please contact your nearest distributor or mail to us overseas@ONO SOKKI.co.jp.


Backup supply / Consumable goods

Model name Product name Purpose
R03-PB6M Connector for gauge sensor signal -
DX40-36P 36-core connector for cable, for BCD signal, for soldered (DX36CV1 is required)

DG-4120/4140/4240/4280
DA-4130

DX36CV1 Plug cover for DX36CV1

DX40-36P

TA2096
 
Adapter for AC power supply (cable: approx. 1.8 m)
Input: AC 100 V, Output: DC 9 V/300 mA
DG-525H/825/925
AA-5100 Thermal recording paper (10-roll / pack)

RQ-1410

Write a review