Ono Sokki LC-8120 GPS / LC-8220 GPS Vector Speedometer

The LC-8120/8220 from Ono Sokki are GPS-based speedometers that measure the speed and distance of moving objects with high accuracy.  A wide range of optional functions such as white-line detecting function (LC-0856), jerk measurement function (LC-0871) and average deceleration speed calculation (function in the LC-0831) are available for various automotive tests.


In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €

Features

  • Support GLONASS satellite in addition to the GPS satellite
  • Small and thin antenna does not affect on the travel resistant measurement or car behavior measurement even if it is attached to the roof of the vehicle.
  • The linearity of angular speed is able to be changed from ±0.1%/F.S. to ±0.03%/F.S. by IMU (option)
  • Analog output frequency is able to be changed from 100Hz to 500Hz by high response IMU analog output function (option).
  • Can be added new options of white-line detecting function, jerk measurement function and average deceleration speed calculation.
  • More than 30 items, such as forward speed, lateral speed, sideslip angle, moving distance, can be measured by one unit. (LC-8220: standard LC-8120: partly option)
  • Provided with 8-ch of analog signal input and 5-ch of pulse signal input. (LC-8220: standard LC-8120: option)
  • The LC-8220 provides 16-ch analog output function as standard. The output data can be selected from the obtained data (tri-axial acceleration, gradient angle, etc.)
  • CAN data input is available as an option. (option)
  • If a satellite is lost, it can be recognized with LED and buzzer.
  • Reliable calibration data (Traceability system diagrams, test result reports and calibration certificates)
  • Various optional vehicle tests by software; acceleration/deceleration test, etc.
  • LC-8120 can be upgraded to the LC-8220 by adding several options.

Further Information

Specification of LC-8120/8220


 
LC-8120  GPS Speedometer
LC-8220 GPS Vector Speedometer
Update frequency 100 Hz
Horizontal speed Measurement range 0.1 to 500.0 km/h
Accuracy ±0.1 km/h*1
Horizontal distance Accuracy ±0.05 %*2
Forward speed Measurement range -(Available by LC-0823) -500.0 to 500.0 km/h
Accuracy ±0.2 km/h*3
Forward distance Accuracy ±0.1 %*4
Lateral speed Measurement range -20.0 to 20.0 m/s
Accuracy ±0.08 m/s*5
Lateral distance Accuracy ±0.15 %*6
Sideslip angle Measurement range -25.0 to 25.0°
Accuracy 0.15°RMS*7 (Reference accuracy)
Vehicle attitude angle Measurement range -180.0 to 180.0°
Accuracy 0.1°RMS*8 (Reference accuracy)
Yaw angle Measurement range -(Available by LC-0821) -180.0 to 180.0°
Accuracy 0.1°RMS*8 (Reference accuracy)
X,Y,Z acceleration Measurement range -98.0 to 98.0 m/s2
[-49.0 to 49.0 m/s2 *9]
Linearity ±0.2 % / F.S. [±0.1 % / F.S.*9] (All reference accuracy)
X,Y,Z angular speed Measurement range -150.0 to 150.0°/s *9
Accuracy ±0.1 % / F.S. [±0.03 % / F.S.*9] (All reference accuracy)
Analog (speed)output Voltage range 0 to 10 V/0 to 500 km/h(Can be changed by attached software.)
Output accuracy ±0.2 % F.S.
Load resistance 100 kΩ or more
Temperature stability ±0.05 % / F.S./°C
Output delay 5 ms or less
Pulse (distance)output Resolution 1, 5, 10 mm/P Selectable
Output delay 5 ms or less
DUTY 50 % ±10 %
Load resistance 10 kΩ or more
Output signal Rectangular wave pulse output:
Hi:5 V % ±0.5 V, Lo: 0.5 V or less
Arbitrary analog
output
Item -(Available by LC-0850A) Selectable 16-ch from Horizontal speed, Forward speed, Lateral speed, Vertical speed, Number of satellites, Travel orientation, North speed, East speed, Sideslip angle, Yaw angle, Pitch angle, Roll angle, IMU coordinate axis XYZ acceleration. IMU coordinate axis XYZ angular speed, Slope angle, Satellite lost flag, Vehicle coordinate axis XYZ acceleration, Vehicle coordinate axis XYZ angular speed, Vehicle attitude angle, IMU coordinate axes XYZ jerk.
Output voltage -10.0 to 10.0 V
(Can be changed by PC software)
Offset error ±5 mV or less
Output accuracy ± 0.1 % / FS
Temperature stability ± 0.02 % / FS/°C
Update frequency 100 Hz/500Hz*10
Load resistance 100 kΩ or more
Output delay 5 ms or less
External synchronous output Function Synchronous pulse output /Asynchronous clock output
Output level Square wave pulse output:Hi 5±0.5 V, Lo 0.5 V or less
DUTY At synchronous pulse output:Hi approx. 100 µs
At asynchronous clock output :50±10 %
Output frequency 100 Hz
Load resistance 10 kΩ or more
Analog input Number of channels 8 ch
Voltage range ±10 V / 20 V
Sampling frequency 100 Hz
Offset ±20 mV or less
Linearity ±0.5 % / FS
Pulse input Number of channels 4 ch:TTL pulse 1 ch:SIN input
Conversion 4 ch TTL:selectable from pulse count, frequency or duty
1chSIN input:Frequency
Frequency range (4ch TTL) Pulse count:DC to 50 kHz
Frequency: 1 Hz to 50 kHz
Duty; 1 Hz to 10 kHz
Frequency range (1ch SIN) Frequency:1 Hz to 50 kHz
Accuracy
(4ch TTL)
Pulse count:±1 count or less
Frequency:input frequency × 0.02 %±1Hz or less
Duty conversion:1 kHz or less;±2 % or less, 1 kHz or more;±6 % or less
Accuracy
(1ch SIN)
Frequency:input frequency × 0.02 %±1 Hz or less
Power supply output DC12 ± 2 V(approx.4 VA or less)×1 ch
External trigger input/output Input Non-voltage contact input: 1ch contact (Switching of logic is available.)
Voltage input: 5 to 24 V input (Switching of logic is available.)
White line detection sensor input
Output Gate output: 1ch, Gate ON/OFF, Rectangular wave pulse output, Load resistance 39kΩ or more
PC interface USB 2.0
General specification Power supply 10 to 28 VDC/AC 100 to 240 V(when AC adapter used:option)
Power consumption Max. 30 VA
Operating temperature range 0 to 50 °C
Storage temperature range -10 to 60 °C
Accessory Antenna (LC-0721),
Remote box (LC-0083),
Phoenix connector,
IMU(LC-0087) and connection cables ,
DC power cable,
USB cable,
PC standard software,
instruction manual
Antenna(LC-0721)X 2,
Large display
Large display unit (LC-0084),
Remote box(LC-0083),
Phoenix connector,
IMU(LC-0087),
DC power cable,
USB cable,
PC standard software,
antenna & IMU mounting jig (magnetic sheet type),
Instruction manual
Outer dimension(weight) Approx. 269(W) × 180(D) × 43(H) mm
(not including protruded section)
( approx. 1.4 kg)
Approx. 269(W) × 180(D) × 71(H) mm
(not including protruded section)
(approx. 2.2 kg)
Others option Power cable for cigarette lighter socket(LC-0730A), Windshield attachment (LC-0740), Digital printer(DPU-414), tape switch, Carrying case(LC-0813)
Recommended PC Operating environment OS:Windows® 10/7[32/64 bit], memory:512 MB or more, HDD:80 GB or more
CPU:Intel Core 2 Duo / 2 GHz or more, USB:USB 2.0 (High speed), 1 port or more
Screen resolution at PC operating environment:XGA(1024 ×768)or more

*1:Accuracy at 30 km/h or higher horizontal speed and with 7 or more acquired satellites.
*2:Accuracy over 300 m measurement distance with 30 km/h or more acquired satellites.
*3:Accuracy with 2 m distance between antennas at 100 km/h horizontal speed and with 7 or more acquired satellites. ±0.8 km/h with 2 m
       distance between antennas at 100 km/h horizontal speed and with 4 or more acquired satellites.
*4:Accuracy with 2m distance between antennas at 100 km/h horizontal speed and with 7 or more acquired satellites.
        ±0.70 % with 2 m distance between antennas at 100 km/h horizontal speed and with 4 or more acquired satellites.
*5:Accuracy with 2 m distance between antennas at 100 km/h horizontal speed and with 7 or more acquired satellites.
        ±0.20 m/s with 2 m distance between antennas at 100 km/h horizontal speed and with 4 or more acquired satellites.
*6:Accuracy with 2 m distance between antennas at 100 km/h horizontal speed and with 7 or more acquired satellites. ±0.65 % with 2 m distance
        between antennas at 100 km/h horizontal speed and with 4 or more acquired satellites.
*7:Accuracy with 2 m distance between antennas at 30 km/h or higher horizontal speed and with 7 or more acquired satellites.
        0.30°RMS with 2 m distance between antennas and 30 km/h or higher horizontal speed and with 4 or more acquired satellites.
*8:Accuracy with 2m distance between antennas and with 7 or more acquired satellites. ±0.2°RMS with 2 m distance
        between antennas and with 4 or more acquired satellites.
*9:Available when the LC-0855 High precision IMU (option) is attached.

*10:Analog output is available when high response output option is attached.

 

Write a review