Ono Sokki IP-3100 Ignition Pulse Detector

The IP-3100 enables ignition pulse detection of gasoline engines with  high sensitivity. The rotation speed can be easily measured by clamping  the primary side cord (low voltage), the secondary side cord (high  voltage), and current cable of the electronic distributor.  The IP-3100  is used with the tachometer made by Ono Sokki.

In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €


  • Increasing the sensitivity enables to use for gasoline engines which was difficult to detect.
  • Also can clamp to the secondary side cord (high voltage) by improvement of opening section.
    (The cable up to φ10 mm can be clamped.)
  • Easy to handle the cable by changing cable material
  • Easy to use with one-touch clamping
  • High reliability with the heat-resistant structure (+120 °C)

Further Information

Overview specification

Detection method Detection by amorphous metal fiber elements
Applicable engine 2-cycle and 4-cycle gasoline engine
Point of clamping Primary side cord (low voltage), secondary side cord (high voltage), current cable of the electronic distributor
Maximum diameter of usable cable max Φ10 mm
Output signal Pulse signal
Singal cable Heat-resistant (120 °C) signal cable: approx. 4.9 m (directly-attached cable), with BNC connector at the cable end.
Operating temperature range -40 to +120 °C
Storage temperature range -50 to +120 °C
Outer dimensions 13.0 (W) × 33.0 (H) × 60.0 (D) mm
weight Approx. 130 g (including signal cable)

Write a review