Ono Sokki DG-5100 Digital Gauge Counter

The DG-5100 is a high-resolution gauge counter having  integrated structure. This counter achieves input frequency at 3 MHz  which is high speed of ten times compared to conventional counter.  (equivalent to a spindle velocity of 300 mm/s at GS-3800 series

The DG-5100 provides various calculation functions as  standard such as condition memory, range (MAX value – MIN value)  display, and offset value setting. Up to three optional cards can be installed in  combination to add following five functions.

1. Analog output function
2. BCD output function
3. Comparator function
4. RS-232C communication function
5. DC power supply  function

In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €

Features

  • The DG-5100 has improved counting speed to use with the linear gauge sensor at 0.1-µm resolution. It achieves the counting function of 1.2 m/s or equivalent that is same as the linear gauge of 1-µm resolution by spindle speed conversion.
  • The required functions can be assembled by selecting and installing optional boards on rear panel such as BCD output, analog output and comparator output.
  • Sensors at 10-µm or 1-µm resolution can be used with. (required for connector conversion cable, sold separately)

Further Information


Overview Specifications

Applicable sensors GS, BS series
Display Fluorescent display tube, 7 digits
Measurement range 0.0000 to ±99.9999/0.000 to ±999.999/0.00 to ±9999.99 mm
Input signal Square wave, phase difference: 90°
Line driver output or voltage output
External control input signal Hold, reset
Power requirement 100 to 240 VAC
Operating temperature range 0 to +50 °C
Storage temperature range -10 to +60 °C
Outer dimensions 96(W)×48(H)×148(D)
Weight Approx. 370 g
Accessory Instruction manuals, MC1,5/3-ST3,5 (for INPUT connector)

Write a review