Ono Sokki CT-6700 Digital Engine Tachometer

Motor vehicle technology is constantly evolving. Stay ahead of the game with an accurate and precise instrument to help you analyse and assess combustion engine performance. The CT-6700 from Ono Sokki is a high-precision digital tachometer that can be used with all types of combustion engines. Due to the specific technical nature of this instrument, we advise that you get in touch with us in order to make a purchase.

Ideal for:

  • Petrol engine analysis
  • Diesel engine analysis
  • Hybrid engine analysis
In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €

Digital Engine Tachometer

This compact tachometer supports 10 kinds of sensors with different uses including ignition pulse detection, gasoline and diesel engine rotation detection, and magneto-electric rotation detection. The rotation speed of an engine has now come to be able to be measured by an ECU crank signal, even when it is difficult to mount a detector on an actual vehicle.

Ono Sokki is one of the world's leading manufacturers of this type of instrument and Eurolec are the UK and Ireland's sole distributor of their products.

Key features:

  • High response measurement - Analog output response; 1 cycle+8 μs or less of input signal –
  • Supports various sensors with different purposes
  • Automatic setting of trigger level with the Trigger Assist Function
  • Measurement by ECU crank signal of unequal interval pulses (option: CT-0672)
  • High-speed digital data output by CAN* interface(option: CT-0671)

Further Information - if you have any questions about our digital engine tachometer then please let us know. 

Input section
Applicable sensor
(sold separately)
IP-292/296, IP-3000A/3100, OM-1200/1500, VP-202/1220, LG-9200, MP-900/9000 series, MP-981, EXT(PULSE), ECU crank angle signal(option)
Measurement range
IP-292/296/3000A/3100:120 to 20000 r/min 
OM-1200/1500:120 to 20000 r/min
VP-202/1220:120 to 20000 r/min 
MP-900/9000 series:30 to 99999 r/min
MP-981:0 to 99999 r/min 
LG-9200:0 to 99999 r/min
EXT(PULSE):0 to 99999 r/min 
CRANK PULSE:120 to 20000 r/min
Input frequency range
0.1 Hz - 120 kHz *1
Display method
(display size)

Fluorescent display tube (52.5 x 11.5 mm)
Display range
0 to 99999 r/min *1
±0.01 %/F.S(±1 count)or less
Analog output
Output range
0 to 10 V
Range setting
1 to 99999 r/min(set in steps of 1 r/min)
Load resistance
100 kΩ or more
Updates in less than 8μs after cycle becomes stable.
16 bit
Pulse output
Output item
DIRECT : Wave-shaped output
0.5[P/R] : Output r/min value to obtain 0.5 P/R 
1[P/R] : Output r/min value to obtain
1 P/R 60[P/R] : Manually switch r/min value output to obtain 60 P/R
Signal level
0-5 V logic signal(Lo:0.4 V or less, Hi:4.5 V or less)
Load resistance
100 kΩ or more
Contact output
Engine run, over run
Setting range
1 to 99999 r/min
Contact capacity
DC 30 V/0.1 A
Applicable connector
(cable side)
Phoenix Contact MVSTBR2, 5/4-ST-5, 08
Digital interface
RS-232C / CAN(option)
Other function
Moving average
2 to 720 times
Deceleration calculation
Selection of time or cycle
Time : 1 to 1200 ms 
Cycle : 1.5/3/5/8/16
Trigger assist
Automatic setting of trigger level employed until pulse detection
Resume function
Preserving condition values even while power is off.
Condition memory
Up to 5 types of condition memory can be saved.
General specification
Power requirement
DC 9 to 28 V, 12 VA or less
·AC adapter(AC100-240 V, 36 VA or less) 
·Input cable with fuse clips on both ends(option)
Outer dimensions
170(W)× 49(H)× 120(D) mm
Approx. 700 g
Operating temperature range
0 to 50 ℃ *2
Operating humidity range
5 to 85 %(with no condensation)
CE marking
Low Voltage Directive: 2014/35/EUEN61010-1 class1 (when AC adapter is used.)
EMC Directive : 2014/30/EUEN61326-1 class1 Industrial Environment 
RoHS Directive : 2011/65/EUEN50581
47 CFR 15 Subpart B Class A
·Rubber foot x 4
·AC adapter (100-240 V) for DC16 V 
·Instruction Manual × 1

*1 In case of EXT(PULSE).
*2 Operating temperature range of the AC adapter: 0 to 40 ℃

Write a review