Ono Sokki CF-4700 FFT Comparator

A pass/fail judgement machine that analyses sound and vibration data from products. Due to the specific technical nature of this instrument, we advise that you get in touch with us in order to make a purchase.

Ideal for:

  • Quality control on production lines
In stock Yes No
Price was € (Inc. VAT) RRP € Price was € (Ex. VAT) RRP €

The CF-4700 FFT comparator is a pass/fail judgment machine used on production lines, that is highly effective at accurate quality inspection by analysing sound or vibration from products. The CF-4700 enables pass/fail judgments by extracting the amount of fluctuation in signal size, focusing on a specific frequency band.

Ono Sokki is one of the world's leading manufacturers of this type of instrument and Eurolec are the UK and Ireland's sole distributor of their products.

Key features:

  •  Compact and lightweight with 1-channel FFT analyzer
  •  8.4 type touch-panel color LCD
  •  Offering 110 dB dynamic range. The real-time analysis is 40 kHz
  •  The Assist Function for setting the judgment block area from the difference between frequency characteristics of OK and NG products
  •  The Power Source Backup Function prevents loss of measurement data in case of a main power down. (Option)
  •  The binary, text and BMP file can be memorizes in the main unit at the same time
  •  Memory data or condition memory can be managed or backup in a PC by means of storing those data in USB memory
  •  Operating CCLD & TEDS.

Input Section

General input
Number of input channels 1 channel
Input connector type BNC (Type C02)
Input type Single-ended, isolated
Input impedance 1 MΩ±0.5 %, 100 pF or less
Input coupling DC or AC (-3 dB±0.3 dB at 0.5 Hz)
Power supply current for sensor (CCLD) +24 V、E mA
TEDS function (* Note) Accepts accelerometer and microphone conforming to IEEE 1451.4 ver.0.9, ver.1.0. 
TEDS ver.0.9 (0: accelerometer, 12: microphone)
TEDS ver.1.0 (25: accelerometer, 27: microphone)
Maximum input voltage 30 Vrms (42.4 Vpeak)
Absolute maximum input voltage 70 Vrms AC 1 minute (50 Hz)
Input voltage range 1 Vrms, 31.62 Vrms (2 ranges)
DC offset -60 dB full scale or less (When auto zero is on and DC coupling)
Amplitude flatness ±0.1 dB
Harmonic distortion -90 dB or less (Standard, when optional filter is off)
Full-scale accuracy ±0.1 dB (At 1 kHz)
Aliasing -90 dB or less
Amplitude linearity ±0.0015 % (At full scale)
Input level monitor Lights up in red LED at excessive input. (Lights up in red for 95% of input voltage range)
Dynamic range 110 dB or more
A/D converter 24 bits type ⊿Σ
External trigger input
Input connector type BNC (Type C02)
Input voltage range ±12 V
Input impedance 100 kΩ
Input coupling DC or AC
Input frequency range 0 to 300 kHz
External sample input
Input connector type BNC (Type C02)
Input voltage range ±12 V
Input impedance 100 kΩ
Input coupling DC or AC
Input frequency range 0 to 300 kHz (Not available direct sampling)
Analog filter
High-pass filter (HPF) Cut-off frequency (Selectable) 1, 3, 10 Hz (-18 dB/oct)
10 Hz conforms to vibration severity standards filter. (3 order Butterworth, ISO 2954)
Low-pass filter (LPF) Cut-off frequency (Selectable) 1k, 10 kHz (-18 dB/oct)
1 kHz conforms to vibration severity standards filter. (3 order Butterworth, ISO 2954)
Digital filter
Frequency weighting filter A, C 
(Conforms to IEC 61672-1 Ed.1.0 class 1,
ANSI S1.4-1983 type 1, 
JIS C1509-1: 2005 class 1)

* Note: If a TEDS supported sensor made by other companies is used, TEDS information may not be read depending on the type of a TEDS tip included in a sensor.

1. If you are considering the purchase of a TEDS sensor made by other companies, please consult to the manufacturer or dealer of the TEDS sensor, and perform the operation check.

2. When you want to use a TEDS sensor you already have with the TEDS supported measurement instruments made by Ono Sokki, please perform the operation check with a demonstration product of Ono Sokki. (Please consult your nearest distributor or Ono Sokki sales office nearby.)


Size 8.4-inch
Resolution 800 x 1600 *
Method TFT color LCD with resistive film type touch panel
Brightness adjustment ON/OFF 2 levels
Lighting (backlight) LED

* The TFT color LCD is created by the full use of advanced technology. However, the pixels (dots) of non-lighting or always lighting occasionally exist in the display. (The ratio of the number of effective dots: 99.999 % or more.) Also, unevenness of the color or brightness may be visible depending on the viewing angle or the temperature change. This is not a product failure, so please note that return or exchange of the product cannot be accepted.

Analysis Section

Frequency range 1 Hz to 40 kHz
Number of sampling points/ analysis points 256/100, 512/200, 1024/400, 2048/800, 4096/1600, 8192/3200, 16384/6400
Real-time analysis 40 kHz (16384 points or less, at internal sampling)
Overlap processing MAX, 75 %, 66.7 %, 50 %, 25 %, 0 %, optional setup
Window function Rectangular, Hanning, flat-top
Time waveform processing function First and second order differentials, single and double integrals
Absolute value conversion, DC cancel, trend elimination, smoothing
FFT calculation 32-bit floating point (IEEE single-precision format)
Trigger function
Trigger level -99 to 99 (Unit: %) Default value: 25 %
Hysteresis level 0 to 99 (Unit: %) Default value: 2 %
Position ±8191
Trigger mode Free, repeat, single, one-shot
Slope +, -, ±
Trigger source CH1, external trigger input
Averaging function
Number of averaging setup 1 to 65535 times
Averaging setup time 0.1 to 999.9 seconds (Interval: 0.1 second)
Time domain Summation average, exponential average
Frequency domain Summation average, exponential average, peak hold, max overall
Amplitude domain Summation average
Averaging control function A/D over cancel
Processing Functions
Time domain Time waveform
Frequency domain Power spectrum, Fourier spectrum, 1/1 octave (bundled), 1/3 octave (bundled)
Amplitude domain Amplitude probability density function, amplitude probability distribution function

Comparator Function

Judgment mode Continuous mode, single mode
Judgment result output Total judgment result, individual judgment result of up to 5 specified blocks or shapes
Automatic data storage Only for NG, all measurement results
Timer function Start delay time setting, judgment execution time setting
0 to 255 seconds (Interval: 1 second)
Block mode
Target waveform Power spectrum, 1/1 octave (bundled), 1/3 octave (bundled), order spectrum
Maximum number of setup blocks 20 blocks
Judgment method Level, peak level, peak max (maximum value), inside max, partial overall, areal content rate 
Judgment method can be specified for each block.
Judgment criterion AND or OR of all specified blocks
Shape mode (CF-0472 option)
Target waveform Time waveform, power spectrum, 1/1 octave (bundled), 1/3 octave (bundled),
order spectrum, tracking diagram
Maximum number of setting shape lines 20 lines
Judgment criterion Specified area, specified level

Memory Function

Recording device Selectable from internal storage of main unit, USB memory or SD/SDHC card
Data file Number of storable data : 9990 (max.)
DAT, TXT, BMP, TRC (Data can be saved simultaneously in four formats. 
(Data storage in TXT, BMP, and TRC formats can be selected optionally.))
Panel condition memory Memorizes and recalls measurement conditions. (50 types max.)


USB (Type A)
Number of ports 2
USB 2.0 USB memory, keyboards, wireless LAN module*
* For the recommended products, 
please contact your nearest distributor or contact us at overseas@ONO SOKKI.co.jp.
USB (Type mini B)
Number of ports 1
Data USB 2.0 for USB mass storage class function (CF-0477 option)
Data in the main unit is read by connecting to a PC. (Not writable)
SD card
Number of ports 1
Supports SD/SDHC Capacity: 4 GB, 32 GB* 
* For the recommended products,
please contact your nearest distributor or contact us at overseas@ONO SOKKI.co.jp.
Number of ports 1 
Remote desktop, external control, file sharing (internal storage)
Number of ports 1
Baud rate 1,200 to 115,200 bps
Digital I/O
Digital input
Number of input signals 9 inputs and common (Insulation withstand voltage 42.4 Vpeak)
Applicable connector FK-MC 0,5/10-ST-2,5
Input function Control by command assignment (max. 9 kinds)
Judgment block changeover (selectable 4 blocks) 
Panel condition selection (15 kinds)
Status output
Number of output signals 4 outputs are separated
(Each signal is isolated, insulation withstand voltage 42.4 Vpeak)
Applicable connector FK-MC 0,5/8-ST-2,5
Output function BUSY, OK, NG, ERR
Comp output
Number of output signals 5 outputs and common (Insulation withstand voltage 42.4 Vpeak)
Applicable connector FK-MC 0,5/6-ST-2,5
Output function Individual judgment output (any 5 outputs)

General Specifications

Power requirement 16 VDC, 3.3 A
AC adapter Power requirement: 100 to 240 VAC, 50/60 Hz
Power consumption: 65 VA or less / 150 VA or less 
(When CF-0478 Power Source Backup Function is installed and charging battery)
Operating temperature range 0 to 40 °C (Humidity 20 to 80 %RH, with no condensation)
Storage temperature range -10 to +50 °C (Humidity 20 to 80 %RH, with no condensation)
Outer dimensions 220 (W) x 185 (H) x 220 (D) mm (Excluding handle, stand, and protruded section)
Weight Without option  Approx. 2.8 kg
With options  Approx. 3.3 kg (When CF-0473 Amplitude Modulation Component Extraction Function and CF-0478 Power Source Backup Function are installed, including battery pack)
Main unit cooling Naturally air cooling (Fanless)
Conforming standards CE marking
Vibration resistance 9.8 m/s2 (Frequency 10 to 150 Hz, in each of X, Y and Z direction)
Shock resistance 400 m/s2 (11 ms duration)
Accessories ·AC adapter x 1 (PS-P20023A + power cable (2 m))
·Instruction manual x 1
·CD-ROM x 1 (Reference guide, utility, etc.)
·SD card x 1 (Exclusive for updates, 512 MB)
·3 Connectors for terminal blocks 
(FK-MC 0,5/10-ST-2,5 x 1, FK-MC 0,5/8-ST-2,5 x 1, FK-MC 0,5/6-ST-2,5 x 1)
·Ferrite core x 1 (E04SR301334, made by SEIWA ELECTRIC MFG. CO.,LTD.)

Write a review